OPERATING INSTRUCTIONS WAH
By rocking your foot back and forth on the pedal, you can instantly change the effect that the CRYBABY has on your tone. Toe down will give you more treble, heel down will give you more bass. Play with different speeds and depths to find a wah tone and rhythm that suits the music you�re playing. By holding the pedal steady in one position, you�ll hear a boost in one particular frequency range. This �dynamic tone control� can be a very useful effect to add sustain, or create feedback at a desired overtone.
AUTO-OFF SWITCHING
As soon as you lift your foot from the pedal (the Heel Down position), the effect is silently switched off and the pedal is automatically placed in �bypass� mode. In this mode, both the effect and the preset volume boost are switched off. (Note: There is an intentional delay built into the �auto-off� switching, to allow you to use the full range of the pedal�s travel without turning off the effect or the preset volume boost.)
VARIABLE Q & VOLUME CONTROLS
On the left side of the 95Q you�ll find two black knobs. The bottom plate will tell you which knob is the Variable Q and which is the Volume Boost. The Variable Q control modulates the intensity of the wah effect by adjusting the wah�s bandwidth. �High� gives a narrow, sharp peak to the affected frequency range; while �Low� delivers a more subtle wah by spreading the effect over a broader range. The Volume knob is a BOOST ONLY device that adds up to 15dB gain to your signal while the CRYBABY effect is in use. Turning Volume to its lowest setting will not shut off your signal, it simply adds no boost.
